Displaying Data in DashboardĪs an example, we are going to create a Mushroom Cards layout to display the available data in a Lovelace Dashboard. You can read our full tutorial for optimizing the Home Assistant database, as there is more to it than just excluding an entity. To exclude an entity from the database, follow the following example: recorder: exclude: entities: - sensor.processor_temperature Code language: YAML ( yaml )Īdd any entities you do not wish tracked as a list here and restart Home Assistant. This is especially true when you are using Home Assistant on a Raspberry Pi with an SD Card. It’s good practice to exclude most of them from the recorder database, as it will create too many read/write cycles and shorten the lifespan of your storage medium. Open Hardware Monitor will create a bunch of entities from the sensor domain containing a bunch of data. To verify everything is working correctly, including your firewall inbound rule open your IP address including the port in the browser, for example: Code language: YAML ( yaml ) Exclude Entities from the Database From here check or uncheck any sensors you don’t want to be pushed to Home Assistant. To select which sensors you want shown in HA, open the app on the host system and click the File tab > Hardware. Once Home Assistant has restarted, a bunch of sensors will be exposed pushing different data from the Open Hardware Monitor app. Change if you used another port) Code language: YAML ( yaml ) xxx.xxx port: xxxx (Optional, defaults to 8085. To setup the integration, add the following to your configuration.yaml file and restart Home Assistant: sensor: - platform: openhardwaremonitor host: 192.168. The Open Hardware Monitor Integration cannot be configured through the UI, only through YAML. Configuring OpenHardwareMonitor in Home Assistant To set a static IP address on your router, see this guide. The integration will not be able to find the host system on the IP address you have setup in configuration.yaml and remove the sensors. Routers can cycle DHCP addresses and render the Open Hardware Monitor integration useless. Note: It’s also important you set a static IP address for your system. You have successfully created an inbound traffic firewall rule for your local network on port 8085.įor Linux, run the following command to open port with firewalld: sudo firewall-cmd -permanent -add-port=8085/tcp sudo firewall-cmd -reload Code language: YAML ( yaml ) But it's a great resource.Give it a Name and a Description (Optional) and click Finish. Reliable, Multi-User, Distributed Bluetooth Occupancy/Presence Detection The main part I found missing was the known_devices.yamlīluetooth Presence Detection for Home Automation – The Level1 Way Thanks to those who posted the work online. Since I had to work through it and piece it together. This is mostly for me so that I have some documentation for myself.īut I hope others might find it useful. I am still reading through them and improving things.Īs I stated at the start. But if you look at the blog links below you might get some more ideas. The final step is the replace all the previous device_tracker references with the new manaully created ones listed in known_devices.yaml Final Thoughts ¶
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |